I recently spoke to Emmanuele Nicali of Lesto Racing at the Monza World Superbike races about the company's motorcycle race products. Lesto supplies both road and race motorcycle exhausts to a number of teams involved in various Italian national championships, including CIV (Italian Superbike championship) and the Superstock 600 and 1000cc series. It also plans to have its exhaust systems on race machines at the Isle of Man TT races in 2011. Fig. 1 shows a race system fitted to a race...
The use of composite materials in racecars is not new; nor does it represent a particular novelty for race engines. The strength, stiffness and low density make them ideal for many components, both structural and decorative. It is now pretty rare to find a race engine airbox, certainly on 'formula' cars, made from anything other than carbon-fibre reinforced polymer (CFRP) composites. It has also been used to good effect for plenums on turbocharged engines, on structural covers for...
To many, the words 'fuel' and 'economy' have no real place in the motorsports world. After all, and as everyone knows, to save fuel the driver has to be delicate on the throttle, avoid braking and keep in as high a gear as he (or she) can. And with these actions seemingly totally at odds with the concept of travelling quickly, I might find it hard to do anything other than agree. Nevertheless, there are times when race organisers wish to restrict the amount of fuel carried on...
I suppose it's the mechanical engineer in me but ever since I can remember I have always been fascinated by complex curves. It may have been the Spirograph I received as a child, rolling one circle around another to produced a series of intriguing spirals. Or it could have been the Lissajous figures describing complex harmonic motion later on at university. Either way, the complex geometries produced in such a simple way left a major impression. The geometry of the gerotor oil pump is...
Dan Esslinger, President of Esslinger Engineering has been building Midget engines since 1990 - "So I guess we're 20-ish years into this thing," he says. In that time, Esslinger Engineering has gone through perhaps 30 iterations of pistons, "That's been due to bore size change, different strokes, different rod lengths, valve locations, things of that ilk," he says. "If you change one, it all changes. "Typically we use JE three-ring pistons because they...